Meguin Schaloel FSE 4 is a thin-bodied, non-emulsifying concrete release agent for wood, chipboard and steel formwork. Apply by spraying or brushing an even thin layer onto formwork. Ensures easy and clean stripping of formwork, smooth surfaces with sharply profiled edges and most economical application.

Application:
The performance of a release agent always depends on the formwork temperature, process technology (which type of formwork is used: Plastic, steel, aluminum, wood rough or smooth, raw, planed, profiled, absorbent or non-absorbent?) and, of course, the concrete formulation. Dosage should be either sprayed, dipped or brushed.

Note:

• Consumption information in approx. figures:
• Absorbent formwork 1 l/approx. 15-30 m².
• Non-absorbent formwork 1 l/approx. 20-40 m².

Characteristic data:

• Density at 15°C 0.820 g/cm³ DIN 51757
• Viscosity at 40°C 4.6 mm²/s ASTM D 7042-04
• Viscosity at 100°C 1.65 mm²/s ASTM D 7042-04
• Pour point -30 °C DIN ISO 3016
• Flash point 142 °C DIN ISO 2592
• Neutralization number 0.1 mg KOH/g DIN 51558 T1
• Oxide ash <0.01 g/100g DIN EN ISO 6245
• Color number (ASTM) 0.5 DIN ISO 2049