Meguin hydraulic oil HLP 46 AF

Meguin Hydrauliköl HLP 46 AF
From €83.89 *
Content: 20 liters (€4.19 * / 1 liters)

Prices incl. VAT plus shipping costs

Artikel:

  • MN-HLP46AF-1x20
  • 8697
  • 4015838086979
  • 19.8 kg

  • This item will only be shipped to delivery addresses within Germany.
IMPORTANT: For the notification of barrels and IBC's by the forwarding agency we absolutely... more
Product information "Meguin hydraulic oil HLP 46 AF"
IMPORTANT: For the notification of barrels and IBC's by the forwarding agency we absolutely need a valid telephone number from you! Without telephone number we reserve the right to cancel your purchase! Shipping of barrels and IBC's only within Germany.
Meguin Hydraulic Oil HLP 46 AF is a mineral oil used as a pressure fluid in hydraulic systems. With active ingredients to increase aging resistance, corrosion protection and EP properties. Due to its additivation, it meets all requirements and is mainly used in hydraulic systems where high thermal stresses occur, corrosion can form due to water and whose pumps or hydraulic motors require oils with wear protection in mixed friction due to the operating conditions. Contains no ash-forming additives, which prevents the formation of sticky deposits when overheated.

Specifications and approvals:
  • Arburg injection molding machines
  • Hydraulic oil DIN 51524 Part 2 HLP 46
  • Hydraulic oil SEB 181 222 HLP 46
  • Müller-Weingarten
  • Engel Austria Injection Molding Machines

Characteristics:
  • ISO viscosity class VG 46 DIN 51519
  • Density at 15°C 0.865 g/cm³ DIN 51757
  • Viscosity at 40°C 46 mm²/s ASTM D 7042-04
  • Viscosity at 100°C 6.75 mm²/s ASTM D 7042-04
  • Viscosity index 100 DIN ISO 2909
  • Pour point -30 °C DIN ISO 3016
  • Flash point 220 °C DIN ISO 2592
  • Demulsibility at 54°C 10 min DIN ISO 6614
  • Air release rate 5 min DIN ISO 9120
  • Foaming behavior at 24°C 60/0 ml ISO 6247
  • Foaming behavior at 93.5°C 40/0 ml ISO 6247
  • Foaming behavior at 24°C after 93.5°C 60/0 ml ISO 6247
  • Corrosion effect on steel 0-B DIN ISO 7120
  • Corrosion effect on copper 1-125 A3 DIN EN ISO 2160
  • Neutralization number 0.2 mg KOH/g DIN 51558 T1
  • Neutralization number after 1000 h < 2 mg KOH/g DIN 51587
  • Oxide ash 0.01 g/100g DIN EN ISO 6245
  • Sulfate ash 0.02 g/100g DIN 51575
  • Brugger test > 30 N/mm² DIN 51347
  • FZG gear short test standard test A/8, 3/90 damage force level >12, spec. wt. change <0.27 mg/KWh DIN 51354
  • Timken test, abrasion at a load of 30 LBS 0.004 g SEB 181 302
  • Color number (ASTM) L 2.0 DIN ISO 2049
Related links to "Meguin hydraulic oil HLP 46 AF"
PEMCO 519 SAE 90 mineralisches Getriebeöl PEMCO 519 SAE 90 mineral- based gear oil
Artikel-Nr.: PE-SAE90-iP519-1x20
Content 20 liters (€2.44 * / 1 liters)
From €48.79 *
Viewed