MEGUIN hydraulic oil HLP 100

MEGUIN Hydrauliköl HLP 100
€765.49 *
Content: 200 liters (€3.83 * / 1 liters)

Prices incl. VAT plus shipping costs

Artikel:

  • MN-HLP100-200F
  • 6419
  • 4015838064199
  • 200 kg
  • IMPORTANT: For the notification of barrels and IBC's by the forwarding agency we absolutely need a valid telephone number from you! Without telephone number we reserve the right to cancel your purchase! Shipping of barrels and IBC's only within Germany.
IMPORTANT: For the notification of barrels and IBC's by the forwarding agency we absolutely... more
Product information "MEGUIN hydraulic oil HLP 100"
IMPORTANT: For the notification of barrels and IBC's by the forwarding agency we absolutely need a valid telephone number from you! Without telephone number we reserve the right to cancel your purchase! Shipping of barrels and IBC's only within Germany.
Meguin Hydraulic Oil HLP 100 is a mineral oil used as a pressure fluid in hydraulic systems. Contains active ingredients to increase aging resistance, corrosion protection and EP properties. Due to its additivation, it meets all requirements and is mainly used in hydraulic systems where high thermal stresses occur, corrosion can form due to water and whose pumps or hydraulic motors require oils with wear protection in mixed friction due to the operating conditions.

Specifications and approvals:
  • Hydraulic oil DIN 51524 Part 2 HLP 100
  • Hydraulic oil SEB 181 222 HLP 100

Characteristics:
  • ISO viscosity class VG100 DIN 51519
  • Density at 15°C 0.870 g/cm³ DIN 51757
  • Viscosity at 40°C 100 mm²/s ASTM D 7042-04
  • Viscosity at 100°C 11.1 mm²/s ASTM D 7042-04
  • Viscosity index 95 DIN ISO 2909
  • Pour point -18 °C DIN ISO 3016
  • Flash point 260 °C DIN ISO 2592
  • Demulsibility at 82°C <= 30 min DIN ISO 6614
  • Foaming behavior at 24°C 30/0 ml ISO 6247
  • Foaming behavior at 93.5°C 50/0 ml ISO 6247
  • Foaming behavior at 24°C after 93.5°C 30/0 ml ISO 6247
  • Air release <= 21 min DIN ISO 9120
  • Corrosion effect on steel 0-B DIN ISO 7120
  • Corrosion effect on copper 1-125 A3 DIN EN ISO 2160
  • Neutralization number 0.5 mg KOH/g DIN 51558 T1
  • Neutralization number after 1000 h < 2 mg KOH/g
  • Oxide ash 0.16 g/100g DIN EN ISO 6245
  • Sulfate ash 0.17 g/100g DIN 51575
  • FZG gear short test standard test A/8, 3/90 damage force level 12, spec. wt. change <0.27 mg/KWh DIN 51354
  • Color number (ASTM) L3.0 DIN ISO 2049
Related links to "MEGUIN hydraulic oil HLP 100"
Viewed