Meguin Hydraulic Oil HLP 10 is a mineral oil used as a pressure fluid in hydraulic systems. Contains active ingredients to increase aging resistance, corrosion protection and EP properties. Due to its additivation, it meets all requirements and is mainly used in hydraulic systems where high thermal stresses occur, corrosion can form due to water and whose pumps or hydraulic motors require oils with wear protection in mixed friction due to the operating conditions.

Specifications and approvals:

• Hydraulic oil DIN 51524 part 2 HLP 10

Characteristics:

• ISO viscosity class VG 10 DIN 51519
• Viscosity at 40°C 10.0 mm²/s ASTM D 7042-04
• Viscosity at 100°C 2.7 mm²/s ASTM D 7042-04
• Viscosity index 108 DIN ISO 2909
• Density at 15°C 0.840 g/cm³ DIN 51757
• Pour point -33 °C DIN ISO 3016
• Flash point 168 °C DIN ISO 2592
• Demulsibility at 54°C <10 min DIN ISO 6614
• Air release rate 2 min DIN ISO 9120
• Foaming behavior at 24°C 30/0 ml ISO 6247
• Foaming behavior at 93.5°C 50/0 ml ISO 6247
• Foaming behavior at 24°C after 93.5°C 30/0 ml ISO 6247
• Corrosion effect on steel 0-B DIN ISO 7120
• Corrosion effect on copper 1-125 A3 DIN EN 2160
• Neutralization number 0.5 mg KOH/g DIN 51558 T1
• Neutralization number after 1000 h < 2 mg KOH/g DIN 51587
• Oxide ash 0.16 g/100g DIN EN ISO 6245
• Sulfate ash 0.17 g/100g DIN 51575
• Color number (ASTM) 0.5 DIN EN ISO 2160